MEILLER's TRIGENIUS® three-way tipper is purpose-built for the landscaping industry. With cutting-edge technology, a sleek new design and consistent performance, MEILLER is the dependable partner for professionals in the green sector.
The innovative design of the TRIGENIUS® reduces weight while the use of high-strength steel increases its loading capacity.
A uniform operating concept across all series and ergonomically designed components shorten operating cycles and make for efficient operation and handling.
All components have to undergo rigorous, harsh stress tests and have been put through their paces in operation. The result is a three-way tipper that tackles every challenge with ingenuity.
| Type | D202 | D204 | D205 | D208 |
| Nominal load | 2 t | 4 t | 5 t | 8 t |
| Technically permissible GVW | 3.5 - 4.6 t | 5 - 7.2 t | 7.49 - 8 t | 9 - 14 t |
| Tipper body length | 2,600 - 3,400 mm | 2,700 - 4,000 mm | 3,000 - 4,200 mm | 3,000 - 4,200 mm |
| Tipper body width | 2,000 mm | 2,000/2,200 mm | 2,000/2,350 mm | 2,200/2,350 mm |
| Side wall height | 400 mm | 400 mm | 400/500 mm | 500/600 mm |
| Floor material | 1.5 mm HBW 450 | 1.5 mm HBW 450 | 2.5 mm HBW 450 | 2.5 mm HBW 450 |
| Front wall material | 1.5 mm BS 70 | 1.5 mm BS 70 | 1.5 mm BS 70 | 1.5 mm BS 70 |
| Side wall and tailgate material | 1.5 mm BS 70 | 1.5 mm BS 70 | 1.5 mm BS 70 | 1.5 mm BS 70 |
Sturdy steel tipper with low dead weight thanks to its weight-optimised design – for flexible use in the transporter class. Maximum comfort due to low overall height and lots of space for stowing tools.
Higher front wall with storage rack
Tie rod system with fixing plates for the system with lashing eyes in walls: 300 kg retention force per tie rod
2x lashing eyes in front wall (1 t) for securing higher loads
Lashing bar with retention force of 800 kg
Permanently good tightness due to the maze-like stop principle of the side walls
Retractable lashing eyes that are flush with the floor with a retention force up to 2 t per lashing point
Sturdy lashing eyes in walls with a retention force of up to 1 t per lashing point
Side walls, continuous, drop type on left and right, side wall height 400 mm
Telescopic cylinder MEILLER
Tipping forks at the front Ball-type tipping parts with one-hand lever at the rear, can be repositioned using the balls
Access steps on the side wall and tailgate
Handle
Plastic or stainless steel toolboxes
Tailgate top-hinged and drop type, with hand-actuated claw lock
Versatile and agile three-way tipper – for virtually any terrain. Ideally suited for transporting bulky items for construction site set-up, for municipal service applications and for transporting bulk goods.
Modular front wall elevation with comb holder for long handle tools
Tie rod system with fixing plates for the system of lashing eyes in walls: 300 kg retention force per tie rod
2x lashing eyes in front wall (1 t) for securing higher loads
Lashing bar with 800 kg retention force
Side wall relief spring
Access steps on the side walls
Permanently good tightness due to the maze-like stop principle of the side walls
Continuous side walls, drop type on left and right, with a side wall height of 400 mm
Retractable lashing eyes that are flush with the floor with a retention force of up to 2 t per lashing point
Sturdy lashing eyes in walls with a retention force up to 1 t per lashing point
MEILLER telescopic cylinder
New hydraulic oil tank with special baffle plates and vibration-dampened fastening system
Tipping forks at the front Ball-type tipping parts with one-hand lever at the rear, can be repositioned using the balls
Tailgate top-hinged and drop type, with hand-actuated claw lock
Plastic or stainless steel toolboxes
*Pictures similar, can include additional equipment.
